STATUS INDICATOR

STATUS INDICATOR

Monitor up to 2 gas types, 4 as special build
1-20 sample points
No sample line purge delay
Wide range of sensor types
4-line alpha/numeric display
Selectable sample line sequence
Display of each sample line location
Easily installed and maintained
Full indication of all operations
Event logging / Modbus / RS232 / RS485
Line blockage and pump fail monitoring
Variable sample time for optimum cycle time
High integrity, comprehensive self-check fault monitoring
Centralised one-man calibration offers minimum running costs
Split system operation – optional
Remote control panel – optional
Line blockage, blow-back – optional
Hazardous area operation – optional
Auto flood cut-off – optional
Enclosure internal gas monitoring with automatic system shutdown – optional
Sample line multiplier – optional
Inquire Now

The CAN Status Indicator may be used as a remote indicator warning panel, providing visual and audible alarms or by menu selection, used as a local repeater unit giving details of individual sensor readings and alarms from aselected sensor group, Defender or 101 control units, and as a main monitor panel for the GasVac Solo.

Communications

  • 4 wire addressable CANbus

Indicators

  • Normal - Green display screen (colour options)
  • Repeater Mode:
  • Concentration | Gas type | Sensor identification
  • Alarm Indicator Mode (menu option)
  • Text - SAFE
  • A1 (low alarm)
  • Red screen flashing 1 second + sounder (colour options)
  • Repeater Mode:
  • Reading | Gas type | Sensor identification | Alarm status
  • Alarm Indicator Mode:
  • Text - LOW ALARM
  • A2 (high alarm)
  • Red screen flashing 0.5 second + sounder (colour options)
  • Repeater Mode:
  • Reading | Gas type | Sensor identification | Alarm status
  • Alarm Indicator Mode:
  • Text - HIGH ALARM
  • A3 (overrange alarm)
  • Red screen flashing 0.25 second + sounder (colour options)
  • Repeater Mode:
  • Reading | Gas type | Sensor identification | Alarm status
  • Alarm Indicator Mode:
  • Text - OVERRANGE ALARM
  • Fault
  • Amber screen flashing + sounder (colour options)
  • Repeater Mode:
  • Fault status | Sensor identification
  • Alarm Indicator Mode:
  • Text - FAULT

Other

  • Manual test - indicators, sounder & relays
  • Weight 0.45kg
Other image 1

Relays

  • Four - A1, A2, A3, fault
  • SPCO 5A/30vDC
  • Latched or unlatched N/E - N/D
  • Fully off timer

Sounder Output

  • 68dBs @ 1 metre
  • Mutable or permanent isolate option
  • Sounder automatic 10 minute time out option

Enclosure

  • ABS flame retardant FR40
  • Lid Screws M4 x 35
  • Protection - IP54 (weather proof)
  • Base - Signal White RAL 9003
  • Entries
  • Base 2 x 20mm knock-outs
  • Rear 5 x 20mm and 2 slot knock-outs
  • Side clamp glands
  • Environmental air seal gasket - option

Mounting

  • Stand offs - M4 or No 8 screws
  • Drill at (C) when stand offs removed
  • Conduit box - drill at (B) 4.2mm
  • Surface mount box - drill at (B) 4.5mm
  • Flush mount unit - see document C1840 for dimensions
Mounting image 1