COMBI 80

COMBI 80

Single or multi-point (MPS) monitoring 1 to 10 sample intake modules
Hazardous area zone 1 and 2 monitoring
Network coverage of lighter and heavier than air gases
Single or dual sensors covering dissimilar gas ranges or types
No valves – no cycle time delays
Ease of installation with low operating costs
No cabling requirement
3 alarm levels & relays
Traffic light status display
4~20mA analogue output
Data logging
Line blockage and pump fail monitor
Alarm delay – option
Enables compliance with BS EN378, CSA B52, ASHRAE 15
1~6 GDS addressable safe/hazardous area fixed sensors direct to the GasVac® Cool unit
Inquire Now

Combi has been designed to operate in the full range of environments from commercial premises through to heavy industrial applications which may require hazardous area sensing. Typical monitor locations are – public buildings, car parks, tunnels, breweries, boiler plant rooms, water treatment works, H&V control, manufacturing,process plants, horticulture, hotels, offices.

Operation

  • Each gas sensor continuously monitors the atmosphere reporting any hazardous conditions to the control unit for display by the alpha numeric screen indicating the reporting sensor, gas type, concentration and alarm status.
  • Alarm levels that are exceeded will automatically activate a variety of signal outputs including analogue/digital data and user selectable relays.
  • The Combi system operates on a 4–core (addressable) or 2/3 core (direct) cable network and has the capacity to monitor up to 64 addressable and 16 direct sensors 8 of which will accept the CC-1 bridge converter module.
  • Larger systems offering unlimited sensors can be achieved using multiple combi units housed in a 19” rack based system or a network controller.
  • The Combi is supplied ready to use with pre–calibrated gas sensors and provides for additional sensors that can be easily added to any point of the network.
  • Optional software (Combi Soft) allows full data logging facilities with system management providing real time views showing sensor locations, alarms status and actual gas values.

Outputs

  • 8 user selectable zone/voting – with NE/ND option and delay to de–energise
  • Relay contacts – 2 D.P.C.O / 6 S.P.C.O. rated @ 5A–230v AC
  • Factory set 1 common low alarm D.P.C.O or group 1
  • 1 common high alarm D.P.C.O or group 2
  • 1 common overange S.P.C.O or group 3
  • 1 common fault alarm S.P.C.O or group 4
  • 4 user selectable S.P.C.O groups 5 to 8
  • General alarm relay – resetable S.P.C.O. for sounders etc.
  • Inhibit function – remote indicator relay
  • Optional – 2 x 32 relays – first 16 programmable with pattern/event with NE/ND options and delay to de–energise – 48 are single event
  • Optional – remote addressable 4/8 way relay unit
  • PC Data logging via USB – event log
  • Modbus – RS485 x2
  • Combi Soft: full data logging /management tool – option.
  • Individual sensor logging – intervals 1–60 mins storage readings 2880
  • Data link – remote functions

Audible Alarm

  • Alarm/Fault – permanent mute option
  • 68dBs @ 1m

Power

  • 230/115v AC or 24v DC ±15%
  • Control unit 7.5w quiescent 17w full alarm
  • Sensor – 1.25w
  • Internal power supply: 20 sensors max. 21+ sensors –11A/24vDC
  • Auxiliary Power Pack required C1541/C1293
Power image 1

Sensor Points

  • 1–64 addressable ­– CANbus – and/or 16 direct 4~20mA 1~8 optional mV bridge inputs

Measurements

  • Combustible Gas – L.E.L., % vol
  • Toxic Gas – ppm, % vol
  • Oxygen – % vol – Depletion/Enrichment
  • Refrigerant – ppm
  • Any 4~20mA transmitter

Indicators

  • Dot matrix LCD 4 line 40 character – indicating sensor location, gas type, (rising or falling alarms), alarm status, system fault, sensor line fault, sensor fault, inhibit, real time clock, event memory
  • Red LED – global alarm
  • Amber LED – global fault
  • Amber LED – inhibit

Sensor Cable – Addressable Direct

  • Main network – 4 core (2 power – 2 comms)
  • 2/3 core (1.5mm2 screened max length 1km)
  • Optional signal booster per additional 1km

Miscellaneous

  • Enclosure cable entry – bottom, rear, top
  • Remote reset/mute

Options

  • Network controller
  • Repeater panel
  • CAN status indicator
  • Data link
  • CC-1 bridge module – mV to 4~20mA converter
  • 16 way mV catalytic converter
  • 8 way 4~20mA input CAN signal converter
  • 8 way 4~20mA output module
  • 4 way alarm relay module
  • 8 way alarm relay module
  • 2 x 32 way alarm relay panel
  • Sensor signal booster 1K+

Environmental

  • Control unit – IP52 – wall mount
  • Optional overhousing – IP65
  • Combi Industrial – IP63 – wall mount
  • Operating temperature: –10 to +50˚C

Dimensions

  • 315W x 265H x 95D – Combi panel (standard enclosure)
  • 386W x 280H x 137D – Combi Industrial – Box 1
  • 386W x 500H x 137D – Combi Industrial – Box 2
  • 19” x 3U x 300mm Deep – rack panel
  • 295W 120H x 80D Din rail module
  • 315W x 265H x 95D – Auxiliary power pack
Dimensions image 1